Hydro Jetting in Windsor, CO
For drains that clog again after a cable, lines with roots, and kitchen lines coated in grease. A camera look comes first, and the price is explained before work starts.
- Roots and grease
- Camera inspection first
- Main and branch lines
- Price before work starts
A drain that clogs again a few weeks after it was cleared
Most people reach this page after a cable machine opened the drain and it clogged again within weeks, or after a cable caught in the line. Both point to the same thing. The blockage is not a lump of debris but a coating or a root mass that a cable only pokes a hole through.
Hydro jetting clears that kind of blockage. A hose with a nozzle sends high-pressure water in several directions, scouring the pipe wall instead of just opening a channel. Sewer jetters can run at up to about 4,000 psi, and the volume of water is what carries the debris out.
Cable machine or hydro jetting: which one fits
| Situation | Cable machine | Hydro jetting |
|---|---|---|
| Soft clog in one branch | Usually enough | More than the job needs |
| Roots through a joint | Cuts a channel, and the roots regrow | Cuts roots and flushes debris, but the entry point remains |
| Grease coating the pipe wall | Pokes a hole, and the grease re-forms | Scours the wall clean |
| Scale or sludge in older lines | Leaves most of it in place | Removes it, if the pipe is sound |
| Cracked, collapsed or Orangeburg pipe | Risk of snagging | Not suitable, so repair the pipe first |
Roots that return are still a repair question. Jetting buys time, and sewer line repair removes the entry point.
What happens on a hydro jetting visit
- 1
Camera inspection
A camera shows the blockage and confirms the pipe is sound enough for jetting.
- 2
Access the line
The jetter connects at a cleanout, so it helps to know where yours is.
- 3
Jet toward the clog
The nozzle is fed in with water pushing debris ahead of it.
- 4
Cut and rinse
A spinning nozzle cuts roots and scours the wall on the way back.
- 5
Camera again
A second pass confirms the line is clean and shows any damage the jetting uncovered.
Jetting needs a cleanout or another accessible opening. The International Plumbing Code (IPC) calls for cleanouts in building sewers, so most homes have one. If none exists, one can be added, and that is quoted separately.
Same drain clogging again?
Tell us what was done last time and how long it lasted.
Where hydro jetting earns its cost in Windsor
Restaurants and food service along the Main Street corridor are the obvious grease cases, and kitchen lines in houses collect the same buildup more slowly. Lines with roots are the other case, especially in older neighborhoods with mature trees.
The Town requires service providers to notify it when work is done in the sanitary sewer system, including plugged lines and debris removal. That applies to jetting as well, so ask how the notice is handled.
Newer subdivisions rarely have roots in the line yet. Repeat clogs there can come from grease or from a sag left by construction, and the camera shows which.
When jetting is the wrong tool
Jetting cleans pipe. It does not fix pipe. A cracked or collapsed section, a bellied line that holds water, or old Orangeburg pipe (bituminized fiber, found in many homes built from the 1940s to the early 1970s) can be damaged by high pressure. That is why the camera look comes first.
In those cases the answer is repair or, for a line that is failing along its length, sewer line replacement. A camera look after the jetting pass shows which of the two applies.
What changes the price of hydro jetting
Jetting is priced by the visit, with the camera inspection quoted alongside it. The quote is given before the jetting starts, and a camera pass is quoted separately when you want one.
If the footage shows damage, repairs are a separate quote and you decide whether to go ahead. Jetting a line that needs repair only delays the repair.
Hydro jetting questions from Windsor homeowners
It depends on the pipe. Sound cast iron, clay and PVC generally tolerate it, but cracked, collapsed or Orangeburg pipe can be damaged, which is why a camera look comes first.
It depends on the cause. Grease and scale can stay away for a long time if habits change, while roots return unless the entry point is repaired. A camera pass afterward shows what to expect.
A cable can catch on a root mass, an offset joint or a broken section. Footage shows which, and if the pipe is damaged, jetting is not the next step.
A cable visit usually costs less up front. Jetting costs more per visit and can cost less overall when a cable keeps failing, so the decision follows the cause.
The line is answered 24/7. A backed-up main is cleared first with the fastest safe method, and jetting is scheduled once a camera shows it is the right tool.
Yes. Restaurants, shops and light industrial sites are covered under commercial plumbing, and the camera look and scope are agreed before work.
Yes, along with Severance, Timnath and Greeley. Milliken and the other towns are covered by the same line.
Hydro jetting in Windsor
Tell us what keeps clogging and get a camera look before any jetting.
☎ (970) 708-6013