Faucet & Sink Repair in Windsor, CO
Dripping handles, weak flow, leaks under the cabinet and slow sink drains. The failing part is identified first, so you only replace what has worn out.
- Cartridge and valve repair
- Faucet replacement
- Supply line replacement
- Slow drain fixes
A drip, a leak under the cabinet, or flow that has faded
A dripping spout, a handle that leaks at its base, weak flow, a loose faucet, a cabinet floor that stays damp, and a sink that drains slowly are the common faults. Most come from a worn internal part or a loose connection, not a failed faucet.
Faucet and sink repair means finding which part is worn: the cartridge, valve seat, O-rings, supply line or drain trap. Replacing the part is often cheaper than replacing the faucet.
Faucet types and why each one drips
Knowing the type matters because the repair kit differs. A single-handle faucet is usually a cartridge, and a two-handle faucet is usually a washer and seat. Matching the part to the type is what keeps the repair from being repeated in a month.
| Type | Usual cause of a drip | Usual fix |
|---|---|---|
| Compression (two handles) | Worn rubber washer or seat | Replace the washer and seat |
| Cartridge | Worn cartridge or O-rings | Replace the cartridge |
| Ball | Worn seats, springs or O-rings | Replace the seals kit |
| Ceramic disc | Worn seals or mineral buildup | Clean or replace the cylinder |
The International Plumbing Code (IPC) requires an accessible shutoff on each fixture supply, so a failed shutoff is a real repair. A faucet more than 15 or 20 years old with a corroded body is usually better replaced than repaired. A leak that returns under the cabinet after a new supply line points to the shutoff valve or the trap, and a stubborn drip behind a wall is a job for leak detection.
Faucet dripping or leaking?
Call and describe where it drips.
What to check before you call
- Close the small shutoff valves under the sink and see whether the leak stops.
- Check the supply line connections for drips with a dry paper towel.
- Look at the drain trap and slip nuts for moisture.
- Unscrew the aerator and rinse out grit if flow is weak.
- Note whether the leak is hot or cold side.
What Windsor homes see
Windsor homes include newer builds with builder-grade faucets and older homes with decades-old fixtures. Hard-water scale can clog aerators, and the right answer depends on your supplier's water. Flow rules matter too: federal rules cap bathroom faucets at 2.2 gallons per minute, and WaterSense models use 1.5, which affects replacement choices.
A slow sink drain can be a trap clog or something deeper. If several fixtures are slow, the problem is further down the line and belongs to drain cleaning. Ask the Town's permit technician at 970-674-2436 whether a fixture swap needs a permit, since adding a new fixture generally does.
What affects the cost of a faucet repair
A cartridge swap is a short visit. A full faucet replacement depends on the fixture. The price is explained before work starts.
Insurance may cover water damage from a sudden supply line failure under the sink, but not the fixture. Replacing braided supply lines every 5 to 10 years prevents a common loss.
Faucet and sink questions from Windsor homeowners
Overtightening can damage the seat. A drip usually means a worn cartridge, washer or seat, which a repair kit fixes.
A good faucet can last 15 to 20 years. Corrosion, repeated leaks and finish damage are reasons to replace.
A clogged aerator or cartridge is the usual cause. If every fixture is weak, the problem is the supply or the pressure regulator.
Yes. Bring the model so the supply and mounting hole count are checked first.
No. A slow drain is a trap or drain-line clog, and a plunger or a cable usually clears it.
If the body is sound and the part costs little, yes. If the finish is flaking or the body is corroded, a new faucet saves a second visit.
Yes, including Timnath, Johnstown, Milliken and Greeley. Each has its own page.
Faucet and sink repair in Windsor
Find the worn part, fix it, and know the price first.
☎ (970) 708-6013